The Ghost Immobiliser
Immobilisers can be an effective weapon in the fight against car theft. They prevent vehicles from being started without a key fob, and are effective in stopping hotwiring and traditional forms of vehicle theft. Newer methods such as relay theft or key cloning are becoming more common.
Created to counter these current trends The ghost immobiliser is designed to make your car completely inaccessible. It's silent and stealthy and does not use key fobs, radio signals or LED indicators.
Easy to install
The Ghost Immobiliser is a revolutionary device, connects with the CAN data network of your vehicle to stop key cloning and theft. It is a TASSA approved product and insurance companies have endorsed it. It is almost undetectable by thieves and operates silently. It makes use of buttons on your steering wheel, centre console and door panels to create an individual pin code sequence that must be entered before you are able to start your car. You can create up to 20 different sequences to increase security. The system is simple to install and doesn't require any additional hardware.
It is recommended to use a reputable installer of CAN immobilisers that is skilled in your particular vehicle model to ensure the most effective results. Ideally, they will have a workshop located in your area that allows you to visit and have the installation completed. There is also an array of tools and materials that can aid you in the installation. They will provide basic hand tools, multimeters insulation tape, and heat shrink tubing to safeguard the connections. A user manual will provide you with instructions for your vehicle's wiring.
Before beginning the installation, disconnect the battery to avoid short circuits and airbag deployment. It is essential to verify the location of the CAN H and L wires, since incorrect identification could lead to unintentional system integration. It is also a great idea to label or mark the wires. Also, use a multimeter to verify that the identified power source provides a consistent 12V supply.
Advanced thieves employ a variety of strategies to get around Ghost Immobilisers, such as jamming or spoofing. These methods are based on amplifying the signal that is sent from your key fob to the electronic control unit in your vehicle. With ghost 11 immobiliser -jamming technology and vigilant monitoring your vehicle, it can be protected from these sophisticated attacks.
Security Enhanced
A ghost immobiliser offers an additional layer of protection to safeguard your car from theft. It works with a PIN code security system that can be entered using existing buttons on your dashboard or steering wheel making it difficult for thieves to access the device and steal your vehicle. The device is also designed to be hidden within your vehicle, without lights or other indicators that would alert a potential thief to its presence. It connects directly to the ECU of your vehicle via the data bus. This means it is not vulnerable to relay attacks or hacking.
The system is an excellent investment for those who own high-end vehicles, as they are at greater risk of being stolen due to their value and the popularity. Its enhanced features protect your car from key copying and ECU swapping. Some ghost immobilisers are also connected to apps, which means you can arm and disarm easily. They also come with a service/valet mode that allows you to temporarily disable them while your vehicle is being repaired or serviced.
Ghost immobilisers also have a excellent feature that it doesn't require any wire cutting. This is a great feature, especially if your vehicle is more recent and doesn't include an immobiliser. Certain systems also work with GPS tracking devices, providing an additional layer of security to your car. A GPS tracker could also lower your insurance rates. If you choose to buy an immobiliser that is ghost, make sure it is TASSA-verified and that an expert installer installs the device for you.
Compatible with all major models and brands
The Ghost Immobiliser has been designed to be compatible with all major makes and models of vehicles protecting your prized possessions from theft. It generates a unique pin code using buttons on your steering wheel, console, or door panels. You must enter this code before you can drive. The system is tamper-proof and undetectable, and is backed by three-year guarantee. It is also fully accredited by insurance providers This means that it could help lower your insurance premiums.
In contrast to standard immobilisers that use the key fob of your car to control the car's ignition and ignition, the Ghost system is connected directly to the engine controller unit using the CAN data bus. It is almost impossible to remove, disable or hack. Additionally to this, Ghost is tamper-proof, meaning that it is virtually impossible to disable or remove. Ghost system can be linked with an secure iPhone app that allows for remote management and monitoring.
You can create an PIN code that is easy to remember, but mathematically difficult for thieves to guess. You can modify and modify the PIN at any time to ensure your vehicle's security even when it's situated in a parking area or on the street. You can also set a service or valet mode if you need someone other than you to drive your vehicle for a short period such as when it's in garage for maintenance. This feature can also to prevent your car from being taken by a shady mechanic. To give you more security you can select a Ghost call alert to notify you if your car is moving or it's moved.
Convenience
The ghost immobiliser is a highly effective security device that protects your vehicle against common methods of theft such as key cloning, key stealing and relay attacks. It connects to the car's CAN network and preventing communication with the engine ECU. learn this here now makes it difficult for criminals to hack or copy your vehicle.
After installation, you'll need to enter a PIN of up to 20 digits in length using the buttons on the dashboard as well as the steering wheel to begin the car. The system is completely concealed and undetectable to thieves, since it doesn't emit any radio frequency signals. It is also able to be programmed to change the PIN of the user, which adds security. The system is also designed to avoid cutting the circuit which makes it nearly impossible to alter.
Some systems allow you to connect directly to the immobiliser using an app on your phone to disarm it immediately if you forget your PIN. Some even come with a service/valet mode that allows you to start your car temporarily, like when you need to drop it off for servicing or valet parking.
The Ghost Immobiliser is also inaccessible to thieves, since it transmits no radio signals. This is a significant advantage over other security systems that are sold aftermarket. It is also simple to use, and doesn't require complicated wiring. It can be used conjunction with dash cams for added security. Dash cam Thinkware F70 features clear and sharp 1080p HD footage, Format Free Technology, and parking mode. The system can be wired to ensure the highest performance and durability.
Installation
If you're looking to secure your vehicle from theft it is important to select the correct immobiliser ghost. This device can help stop car theft by blocking communication between the engine controller unit (ECU) and key fobs. This device stops thieves from intercepting and cloning the signal that allows you to start your vehicle. It can also detect if it has been tampered and alert the vehicle owner.
The device is simple to install and connects to your vehicle's existing systems. It doesn't require any modification to the wiring in your vehicle and can be installed in a hidden location, like under the dashboard. To ensure that the device is properly installed, follow the instructions in the user's manual. It is also crucial to test the system after installing it. This will ensure that the immobiliser ghost is functioning in the way it is intended.
You can buy an Autowatch Ghost 2 immobiliser, and have it installed by a certified installer. The installer will connect Ghost to your vehicle's CAN Bus system, making it difficult for thieves to remove the system or bypass it. The installation process usually takes 2-3 hours.
It is recommended to consult the wiring diagram of your vehicle during the installation process. This will help you identify the CAN High and CAN Low wires needed to connect your Ghost to the engine of your vehicle. It is also important to verify the connections to ensure that they are safe and well-insulated.
After the installation is completed, you can use the Ghost Immobiliser in normal operation. It will shut off your vehicle's ignition if it is not started using the correct PIN code, which you can create yourself. The ghost of the immobiliser can be changed to Service/Valet Mode in case you need your vehicle to be serviced or valet-parked.